Pull the fuse and check for a broken metal strip, or test it with a multimeter or test light.
Visual check
Pull the fuse and look through the clear plastic. A blown fuse has a broken or melted metal strip.
Test with a multimeter
Set it to continuity or ohms. A good fuse reads near 0 ohms and the multimeter beeps. A blown fuse shows no continuity.

Test light
Touch the probe to both test points on each fuse while powered. Light on both sides means good. On one side only means blown.
Replace
Use the same amperage. Check the fuse box diagram. A fuse blowing again signals a short circuit.
Colors
Standard blade fuses: 5 A tan, 10 A red, 15 A blue, 20 A yellow, 25 A clear, 30 A green.

Safety
Turn off ignition first.
Based on data from automotive repair manuals and the NHTSA.







